Imagine you are relaxing at the poolside, and suddenly strange noises start coming from the pump and filters of the swimming pools. Sometimes these sounds are of the working of the machinery, but when these noises become intensified, they can indicate that a big issue is about to come out. It is important to find out the reasons for these sounds and what Georgia pool cleaning companies can do.
Reasons for Strange Sounds Explained by Georgia Pool Cleaning Companies
When the pool inspection companies visit the clients and notice strange sounds coming from the swimming pool filters and pumps, they give the three main reasons mentioned below.
Filters and Pumps are Dirty
The most obvious reason for noises occurring in the machinery of the swimming pool is that the filters and pumps are not cleaned often. Dirt, debris, and trash can get stuck in the pump and filters, clogging them and producing strange sounds.
The Hardness of Water has Increased
The hardness of the water is indicated by the level of presence of calcium carbonate. The normal level of calcium is from zero to sixty milligrams per liter. If this quantity increases, then it means the water will become hard.
Defect In the Pressure Switch of Pool Pump
The main purpose of a pressure switch is to cut off the supply of hot water when the pump is turned off. Sometimes the switch is turned off, but it is still operating because of a mechanical fault.
What Types of Sounds to Expect from Swimming Pool?
You might experience unusual sounds that include rattling, rocking of machinery, grinding, gurgling, whining, high-pitched buzzing noise, and vibration. You must be thinking, why is vibration mentioned here? The reason is vibrating things have their sound.
What to Check During Pool Inspections in Atlanta
When the swimming pool cleaning companies like Pool Cleaning Georgia come and inspect the place, they check the following things to ensure that sounds are not heard in the future, and the pumps and filters are properly working.
The Swimming Pool Pump is Appropriately Installed
Many times this problem of sounds occurs because the pump and filters are not installed in the right way. The pump system has to be mounted on the platform properly; so that it doesn’t move from its place.
Using Anti-Vibrating Pad
The anti-vibrating pads are made from either rubber or thick foam. They are designed to absorb all the vibration, and no sounds are heard. But a point that has to be noted is that the pads have to be removed to check for strange noises that might indicate an issue.
Ensure Parts are Bolted Together
The inspection team has to look at different parts of swimming pool filters and pumps to make sure that they are bolted accurately; so that no part gets loose and starts to vibrate. Also, check if the bearings are in the right condition to reduce friction.
The Seal of Pumps is Attached
The seal is protection provided to the pump. When this seal is damaged, then water can reach inside part of the pump and cause mechanical issues. Sometimes the seal doesn’t fit because it has passed its lifespan.
The Air is not Leaking
There can be many reasons for air leaking in the pump, including a broken lid of the pump, the seal is damaged, pipes are leaking, the water level is increasing, and skimmers are not managing the air coming through them.
Check for Any Blockage
When the pump and filters are blocked because of debris, trash, and dirt stuck in them, you will hear the sounds mentioned in the above paragraph. Make sure that the pumps and filters are cleaned regularly.
These are the main reasons why sounds are coming from the pumps and filters, as Georgia pool cleaning companies explained. Also, what to do to ensure that the noises don’t come in the future.